A wall tie is used to tie the internal

leaf and external leaf constructed of bricks, blocks or structural framing with a brick fa?ade. The tie is

placed in the cavity wall during construction and spans the cavity. Each end of the tie is specifically designed

to embed into the mortar at a minimum depth of 50mm at each side.


For buildings constructed before 1970, mild steel wall ties were used as best practice. Due to the nature of

the product, homeowners are now finding that the wall ties have begun to degrade causing various issues such as;

cracking in brickwork, mortar blow out and unstable external leaves. These old wall ties can be replaced with

remedial wall ties which is a fairly common procedure, either as a DIY project or a professional service. As

Industry requirements dictate, ACS use stainless steel in all wall ties as standard, ensuring our product does

not corrode or cause any issue with brickwork in the future. Historically, fish tail wall ties and butterfly

wall ties were the go-to product in the construction industry, unfortunately, the extremely sharp edges on these

types of wall tie meant that a redesign in the product was required. ACS Stainless Steel has led the innovation

of wall ties for over 20 years, working closely with UCAT (now part of Unite) to abolish the manufacture and

use of dangerous wall ties to be superseded with the first safety tie, designed and manufactured by ACS.


Types of Wall Tie


Typically, two variants of wall ties are used during construction, Type 1 and Type 2 wall ties.


A Type 2 wall tie is predominantly used in residential buildings not exceeding 2 stories in height, this

common wall tie is usually made of stainless steel wire and folded to have the following features: Central

cavity drip, insulation clip compatibility and safety ends, preventing injury during installation.


Whereas a Type 1 Wall Tie is a heavy duty design, used in public and commercial buildings such as prisons,

hospitals and high rise structures. The unique design is made of pressed stainless steel incorporating the

following features: High strength due to its shape, central cavity drip, embedment markings to assist with

correct installation, superior adhesion to mortar due to the shape of the specialist safety end and insulation

clip compatibility.


There are many types of wall ties which are explained in detail in our types of wall tie article.


ACS also offers a ‘design a tie’ service where we can manufacture any wall tie to your exact requirements

and specification. These bespoke products fall under our CE certification for manufacture and design, meaning

you have total peace of mind that we are able to produce a quality, compliant product with a fast turnaround

time.


Nut Fasteners


Fastener nuts are internally

threaded devices that are typically used in combination with equally threaded bolts to produce a joining of two

or more components. Standard inch and metric fastener nuts are available in a wide range of sizes, strengths,

materials and finishes and aid in securing a joint from loosening due to vibration. Fastener Solutions offers a

variety of nuts that are available in a selection of shapes, sizes, styles, grades, and plating. We will work

with you to choose the most effective and durable product for your application. Our most common types of nuts

and bolts are the hexagonal or square nuts with internal threads that screws on to a threaded bolt, but we stock

everything from wing nuts to battery nuts. View our full inventory of products below. Within the realm of

fasteners, nuts are a hardware component that feature a threaded hole. Most often paired with mating bolts, nuts

may be used to secure multiple parts together through the means of thread friction, bolt stretching, and part

compression. Coming in a variety of forms, different nuts may be procured to accommodate a range of assemblies

and needs. To help you familiarize yourself with common options, we will provide a brief overview of the most

widely used variations.



The Importance of Bracing for Plumb Walls


Metal braces are your best option to ensure the straightest wall possible. They offer a higher level of

consistency since wood itself is not always straight, which can affect the wall. They are easy to use and can be

installed much more quickly than wood bracing. Metal systems also have a much longer life expectancy than wood

since they can be used over and over again. In addition, adjustments can be made easily after the concrete is

poured with metal bracing. With wood bracing this can be difficult and dangerous,Plumbing the walls is one of

the very last things to be done on an ICF project. Always stack corners to plumb but intentionally lean wall

segments inward 1/4” towards the bracing. Since plumbing brace is typically installed on the inside of the walls only, this is done incase the wall

bulges towards the bracing. It is much easier to push a concrete wall outward rather than pull it inward.


What is Aluminium Formwork and Advantage


Aluminum Form Tie

is a construction system which is for formingthe cast-in-place concrete structures of a building. It is

also a system for controlling and scheduling the work of other construction trades such as steel reinforcement,

concrete placement, and electrical and mechanical conduits,Aluminium Formwork system is highly suited for load-

bearing wall construction whereas traditional formwork consists of Plywood and timber is not suitable

for high pressure of fresh concrete on the wall. The advantage of this technology are that it is fast, simple,

adaptable and cost effective. It produces total quality work with requires minimum maintenance and when

durability is the prime consideration.This system is unique as all the components in a building including

walls, columns, beams, staircase, slabs, floors and window hoods are concrete and there is no need for

masonry. The Full Tie and Nominal Tie both is made from high strength steel to ensure consistent quality.

The ultimate load can be 7500LBS. The Wedges and Pins are both treated with heat treatment. That makes the

products much more stronger.


High tensile tie rod connector


A high tensile rod connector is provided that includes a first

section having an internally threaded surface and a second section having an internally threaded surface. The

threads of the first section mate with the threads of the second section. A pair of first flanges is rigidly

coupled to the first section and extends outwardly therefrom. Similarly, a pair of second flanges is rigidly

coupled to the second section. A series of bolts extends from the first flanges to the second flanges. The bolts

are adapted to removably couple the first section to the second section. The first and second sections may be

located on a damaged tie rod and secured thereto, thereby repairing the damaged tie rod without removing tension

therefrom.


The High Tensile UNC Tie Rods are available in all diameters shown, with lengths from 3” to 20’-0”.

They are available all-threaded, thread one end, or threaded both ends. Short length tie rods threaded both ends

under 2’-0” are usually crimped to prevent rotation in the concrete during removal of the Shebolt. Ties

threaded each end allow easy spot-checking of the connection, to insure proper engagement.